National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| 7345499 |
19207 |
A |
3 |
2 |
X |
XX |
|
|
CAGE Information
| Code |
Company |
| 19207 |
U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CQFM |
HARDNESS RATING |
85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM |
| CQFM |
HARDNESS RATING |
85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM |
| ADAV |
OVERALL DIAMETER |
2.750 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| MATT |
MATERIAL |
RUBBER SYNTHETIC OVERALL |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
417,GR SB910ABC1E3F2 MIL STD SINGLE MATERIAL RESPONSE OVERALL |
| ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
| AAUB |
HOLE DIAMETER |
1.750 INCHES MINIMUM AND 1.781 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
1000 POUNDS PER SQUARE INCH |
| ABNM |
THICKNESS |
0.312 INCHES NOMINAL |
Similar Parts