National Stock Number (NSN) Output Data
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 4G13515-101A | 98897 | A | 3 | 2 | 2 | SE |
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5612 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AGGP | DRILLED HOLE DIAMETER | 0.070 INCHES NOMINAL |
| ADBG | NUT THICKNESS | 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
| ACTD | NUT DIAMETER | 2.870 INCHES MINIMUM AND 2.890 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION J |
| ADBM | DRIVE POINT QUANTITY | 4 |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| BZRR | THREAD SERIES | UN |
| MATT | MATERIAL | STEEL COMP 410 OVERALL |
| CQJX | NOMINAL THREAD SIZE | 2.375 INCHES |
| ACTA | NUT STYLE | ROUND |
| ALET | HOLE TYPE AND QUANTITY | 2 DRILLED |
| ADBH | DRIVE POINT WIDTH | 0.290 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| ABQU | DRIVE POINT DEPTH | 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |