National Stock Number (NSN) Output Data
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 6435-20179-101 | 78286 | A | 3 | 2 | 1 | CT |
CAGE Information
| Code | Company |
|---|---|
| 78286 | SIKORSKY AIRCRAFT CORPORATION |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQJW | TOP RECESS DIAMETER | 0.604 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| CRSD | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| CRKG | BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MATT | MATERIAL | STEEL OVERALL |
| AAUB | HOLE DIAMETER | 0.505 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.177 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| CSML | BOTTOM RECESS DIAMETER | 0.604 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH |
| FEAT | SPECIAL FEATURES | EXTEREME OUTER EDGES OFBOTH BEARING SURFACES ROUNDED |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | RECESSED BOTH SIDES |
| CSYM | SURFACE FINISH | 100.0 MICROINCHES ALL SURFACES |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |