National Stock Number (NSN) Output Data
Definition:
A NUT, FLAT ON TOP AND BOTTOM HAVING 6 FLAT SIDES. FOR ITEMS WHICH HAVE INTERNAL TAPERED OR STRAIGHT (PARALLEL) PIPE THREADS, SPECIFIC ELECTRICAL CONDUIT SIZE DESIGNATION, AND WHICH WHEN INSTALLED, PROVIDE A METHOD OF TIGHTENING TO LOCK THE CONNECTION, SEE LOCKNUT, ELECTRICAL CONDUIT. SEE ALSO LOCKNUT, TUBE FITTING. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE WIDTH ACROSS THE FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. (WHEN HEIGHT OR THICKNESS AND/OR WIDTH ACROSS THE FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 6253074-1 | 52088 | A | 3 | 2 | 1 | KZ | ||
| 6253074-1 | D9182 | A | C | 1 | 6 | ZZ | AC |
CAGE Information
| Code | Company |
|---|---|
| 52088 | LOCKHEED MARTIN CORPORATION DBA LOCK |
| D9182 | BOSCH REXROTH GMBH LOHMANN STOLTERFO |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | 0.112 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.250 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 304 OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION A |
| ADEA | NUT HEIGHT | 0.290 INCHES NOMINAL |
| ADFK | NUT COUNTERBORE DEPTH | 0.165 INCHES MINIMUM NUT AND 0.175 INCHES MAXIMUM NUT |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AZKQ | TEMP RATING | NOT RATED |
| AAWY | COUNTERBORE DIAMETER | 0.141 INCHES MINIMUM NUT AND 0.143 INCHES MAXIMUM NUT |
| ACTA | NUT STYLE | HEXAGON |
| AGGP | DRILLED HOLE DIAMETER | 0.063 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| ALET | HOLE TYPE AND QUANTITY | 2 DRILLED |
| BZRR | THREAD SERIES | UNC |
| AAJD | THREAD CLASS | 2B |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CRTM | BEARING SURFACE TYPE | FLAT |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 40 |