National Stock Number (NSN) Output Data
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 2007314-1 | 17576 | A | 3 | 2 | A | KZ |
CAGE Information
| Code | Company |
|---|---|
| 17576 | GOODRICH CORP |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSML | BOTTOM RECESS DIAMETER | 0.800 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 1.562 INCHES NOMINAL |
| CRSD | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL |
| AAUB | HOLE DIAMETER | 0.765 INCHES NOMINAL |
| CQJW | TOP RECESS DIAMETER | 0.800 INCHES NOMINAL |
| CRKG | BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626,COND E4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-5626,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-5626,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABPX | MATERIAL THICKNESS | 0.170 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STYL | STYLE DESIGNATOR | RECESSED BOTH SIDES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL OR MM 4951,CAGEC 17576 MFR REF SINGLE TREATMENT RESPONSE OVERALL OR MM 5542,CAGEC 17576 MFR REF SINGLE TREATMENT RESPONSE OVERALL |