National Stock Number (NSN) Output Data
Definition:
A NUT, FLAT ON TOP AND BOTTOM HAVING 6 FLAT SIDES. FOR ITEMS WHICH HAVE INTERNAL TAPERED OR STRAIGHT (PARALLEL) PIPE THREADS, SPECIFIC ELECTRICAL CONDUIT SIZE DESIGNATION, AND WHICH WHEN INSTALLED, PROVIDE A METHOD OF TIGHTENING TO LOCK THE CONNECTION, SEE LOCKNUT, ELECTRICAL CONDUIT. SEE ALSO LOCKNUT, TUBE FITTING. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE WIDTH ACROSS THE FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. (WHEN HEIGHT OR THICKNESS AND/OR WIDTH ACROSS THE FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 6395396-5 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 6394396-5 | 31442 | A | 3 | 2 | E | ZZ | ||
| 6394396-5 | 53711 | A | D | 9 | C | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
| D9182 | BOSCH REXROTH GMBH LOHMANN STOLTERFO |
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ASDB | WIDTH ACROSS FLATS | 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | HOLES ARE DRILLED ACROSS 3 ALTERNATING CORNERS, CENTERED 0.050 - 0.070 INCH FROM CORNER; MARKED "SOC" ON ONE FLAT EDGE PER DRAWING |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| ADEA | NUT HEIGHT | 0.320 INCHES MINIMUM AND 0.337 INCHES MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AZKQ | TEMP RATING | NOT RATED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286, FORM 1/2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| ACTA | NUT STYLE | HEXAGON |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NUT, HEX, DRILLED, K-MONEL |
| MATT | MATERIAL | NICKEL ALLOY K-500 OVERALL |
| AGGP | DRILLED HOLE DIAMETER | 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNC |
| ALET | HOLE TYPE AND QUANTITY | 3 DRILLED |
| AAJD | THREAD CLASS | 2B |