National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
PIN , SHOULDER , HEADLESS
Definition:
A CYLINDRICALLY-SHAPED HEADLESS ITEM, HAVING A SHANK AT ONE OR BOTH ENDS. IT IS USED FOR ALIGNING, FASTENING, OR TRANSFER OF TORQUE AND/OR THRUST BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE THREADED ON ONE END.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 11EJW2 | 76040 | A | 3 | 2 | X | XX | ||
| FC4396 | 63477 | A | 5 | 9 | 6 | 9Z | ||
| 250M1 | 56442 | F | 5 | 9 | 5 | KZ | ||
| 2021947 | 24617 | A | 5 | 9 | X | XX | ||
| 2021947 | 7X677 | A | C | 1 | 5 | ZZ | 9X | |
| F4396 | 63477 | A | 5 | 9 | 6 | 9Z | ||
| 306948 | 65282 | H | 5 | 9 | X | XX | ||
| 5282741 | 19207 | A | 3 | 2 | X | XX | ||
| 1846S71 | 78500 | A | 5 | 9 | X | XX | ||
| 11A8912 | 95201 | A | 3 | 2 | X | XX | ||
| 1846S71 | 3D6E9 | A | 5 | 9 | 5 | ZZ | ||
| 5214976 | 19207 | A | 3 | 2 | X | XX | ||
| 4AA01138 | 62265 | A | 3 | 2 | X | XX | ||
| A214976 | 19207 | A | 5 | 2 | 5 | KZ | ||
| A282741 | 19207 | A | 5 | 2 | 5 | KZ |
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
| 76040 | MACK TRUCKS INC PARTS OPN |
| 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE |
| 56442 | DIAMOND REO TRUCK CO |
| 24617 | GENERAL MOTORS CORP |
| 7X677 | GENERAL MOTORS LLC DBA GENERAL MOTOR |
| 65282 | WHITE MOTOR CORP |
| 78500 | MERITOR HEAVY VEHICLE SYSTEMS LLC |
| 95201 | NAPCO INTERNATIONAL LLC |
| 3D6E9 | AXLETECH INTERNATIONAL LLC |
| 62265 | VOLVO TRUCKS NORTH AMERICA INC. DBA |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRDY | FIRST END LOCATION | LONG END |
| CRDY | FIRST END LOCATION | LONG END |
| AATR | SHANK LENGTH | 0.764 INCHES MINIMUM AND 0.774 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL |
| ABPF | SECOND UNDERCUT DIAMETER | ANY ACCEPTABLE |
| STYL | STYLE DESIGNATOR | UNDERCUT |
| ABHP | OVERALL LENGTH | 1.047 INCHES MINIMUM AND 1.078 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| CQTR | SECOND SHANK DIAMETER | 0.307 INCHES MINIMUM AND 0.309 INCHES MAXIMUM |
| AAVH | SHOULDER DIAMETER | 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| ABPD | SECOND UNDERCUT WIDTH | ANY ACCEPTABLE |
| ABPC | UNDERCUT WIDTH | 0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| AAHP | SECOND END STYLE | SQUARE |
| CRMG | FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAZE | SHANK DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| CWAS | SECOND SHANK LENGTH | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |