National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
PIN , STRAIGHT , HEADED
Definition:
A HEADED, CYLINDRICALLY-SHAPED ITEM HAVING A SOLID SHANK FOR FITTING INTO CORRESPONDING HOLES, USED FOR ALIGNING OR FASTENING. IT MAY HAVE WELDING PROJECTIONS. IT ALSO MAY CONTAIN HOLES DRILLED PERPENDICULAR TO AXIAL CENTERLINE. EXCLUDES PIN, ECCENTRIC.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 7305472 | 19206 | A | 3 | 2 | X | XX |
CAGE Information
| Code | Company |
|---|---|
| 19206 | DEPARTMENT OF THE ARMY WATERVLIET AR |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | STEEL COMP 4023 OVERALL OR STEEL COMP 1320 OVERALL |
| CQPJ | PIN CHAMFER ANGLE | ANY ACCEPTABLE |
| HGTH | HEIGHT | ANY ACCEPTABLE |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES HEAD OUTSIDE DIAMETER |
| ABMZ | DIAMETER | 0.178 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| ABPB | UNDER HEAD LENGTH | 1.170 INCHES MINIMUM AND 1.190 INCHES MAXIMUM |
| AASK | HEAD STYLE | BUTTON (RATIO OF HGTH/CRRG OVER 0.190 TO 0.300 INCLUSIVE) |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.110 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| SFTT | SURFACE TREATMENT | PHOSPHATE OVERALL |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| STYL | STYLE DESIGNATOR | STRAIGHT |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES SHANK END |
| AAZP | CHAMFER LENGTH | ANY ACCEPTABLE |
| CRRG | PIN HEAD DIAMETER | 0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| ABRC | FIRST HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |