Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 19207 |
U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| ABHP |
OVERALL LENGTH |
4.437 INCHES NOMINAL |
| AMDL |
FIRST END DIAMETER |
0.8700 INCHES MINIMUM AND 0.8715 INCHES MAXIMUM |
| AMGR |
SECOND END SLOT DEPTH |
0.062 INCHES NOMINAL |
| AMFZ |
SECOND END DIAMETER |
0.8710 INCHES NOMINAL |
| CSPY |
LARGEST STEP DIAMETER |
0.8700 INCHES MINIMUM AND 0.8715 INCHES MAXIMUM |
| AKTN |
SECOND END SLOT WIDTH |
0.093 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
FLATTED AND INTERNALLY THREADED |
| MATT |
MATERIAL |
STEEL |
| AMCX |
FIRST END FLAT LENGTH |
0.3120 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
CLUTCH RELEASE MECHANISM,TRACTOR,FULL-TRACKED |
| AMHD |
SECOND END HOLE DEPTH |
0.656 INCHES NOMINAL |
| AMCW |
FIRST END FLAT DEPTH |
0.1200 INCHES NOMINAL |
| AMGS |
SECOND END HOLE DIAMETER |
0.2030 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
CROSS DRILLED HOLE AND SLOTTED |
| AMER |
FIRST END INTERNAL THREAD LENGTH |
1.500 INCHES NOMINAL |
| ATPC |
STEP QUANTITY |
5 |
Similar Parts