Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT. UNIFORM CONTACT PRESSURE ON THE RESISTANCE ELEMENT IS MAINTAINED BY POSITIVE PRESSURE TO PERMIT SMOOTH ELECTRICAL AND MECHANICAL CONTROL OF THE RESISTOR OVER THE ENTIRE RESISTANCE RANGE. THE RESISTIVE ELEMENT IS CONSTRUCTED OF A COMBINATION OF TWO MATERIALS USUALLY CONSISTING OF A WIREWOUND ELEMENT WITH A COATING OF CONDUCTIVE PLASTIC APPLIED OVER THE RESISTANCE WIRE WHERE THE SLIDER MAKES CONTACT. MAY BE CONSTRUCTED OF A SINGLE OR MULTITURNS OF WIRE SUPPORTED ON AN INSULATING STRUCTURE ON WHICH THE WIPER CONTACTS THE COATED WIRE CONTINUOUSLY IN THE DIRECTION OF WIPER TRAVEL. THE OPPOSITION TO THE FLOW OF CURRENT IS AN INHERENT PROPERTY OF THE WIRE USED AND IS MANIFESTED IN THE HEAT DISSIPATED IN THE RESISTOR ITSELF. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT; AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES OTHER RESISTOR (1), VARIABLE, (AS MODIFIED).
CAGE Information
| Code | Company |
|---|---|
| 96214 | RAYTHEON COMPANY |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABJT | TERMINAL LENGTH | 0.188 INCHES MINIMUM |
| ABJT | TERMINAL LENGTH | 0.188 INCHES MINIMUM |
| AAPN | SECTION QUANTITY | 1 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| CBME | CUBIC MEASURE | 0.037 CUBIC INCHES |
| PRMT | PRECIOUS MATERIAL | GOLD |
| ADAQ | BODY LENGTH | 0.410 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AXGY | MOUNTING METHOD | TERMINAL |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0/+20.0 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| ABXF | SHAFT LENGTH | 0.062 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 200.000 OHMS SINGLE SECTION |
| AAQL | BODY STYLE | RECTANGULAR |
| ADAU | BODY HEIGHT | 0.375 INCHES NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABWV | SHAFT DIAMETER | 0.090 INCHES NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7200.0 NOMINAL |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| TEST | TEST DATA DOCUMENT | 13499-382-0015 DRAWING |
| APXH | TERMINAL LOCATION | REAR END |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| ADAT | BODY WIDTH | 0.240 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/+100.0 SINGLE SECTION |