National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
MOUNT , RESILIENT , WEAPON SYSTEM
Definition:
AN ITEM MADE OF MATERIAL HAVING ELASTIC PROPERTIES. IT MAY HAVE RIGID MOUNTING FACILITIES SUCH AS A FLANGE(S), SLEEVE(S), STUD(S) OR THE LIKE. IT IS DESIGNED TO ISOLATE OR DAMPEN SHOCK AND/OR VIBRATION OF A CONTINUOUS OR INTERMITTENT ORIGIN AND SERVE AS A SUPPORT FOR A WEAPON SYSTEM COMPONENT TO BE ISOLATED. EXCLUDES MOUNT, RESILIENT, GENERAL PURPOSE; SPRING (AS MODIFIED); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; HYDRAULIC AND PNEUMATIC SHOCK ABSORBERS, DASH-POTS, GROMMETS, AND SHOCK PADS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| N6300-1 | 81860 | A | 3 | 2 | 2 | KE | ||
| 16461 | 72914 | A | 7 | 2 | 1 | KE |
CAGE Information
| Code | Company |
|---|---|
| 72914 | GRIMES AEROSPACE COMPANY DBA HONEYWE |
| 81860 | BARRY WRIGHT CORPORATION DBA BARRY C |
Federal Supply Class
Title
HARDWARE, WEAPON SYSTEM
Inclusions:
INCLUDES ADAPTERS; ANCHOR PLATES AND STRAPS; ANODES; BELLOWS; COUPLINGS; CONTROL RODS; ACCESS DOORS; FAIRLEADS; MOUNTS; TIE RODS; YOKES.
Exclusions:
EXCLUDES COMMERCIAL HARDWARE (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABKU | FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| HGTH | HEIGHT | 0.781 INCHES NOMINAL |
| AGFF | FLANGE WIDTH | 1.250 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| AFQN | FLANGE LENGTH | 1.750 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | ROUND W/FLANGED BUSHING TWO-HOLE FLANGE |
| BXDM | RESILIENT MEMBER MATERIAL | RUBBER, SYNTHETIC |
| AARX | INSIDE DIAMETER | 0.166 INCHES NOMINAL |
| BXCQ | FLANGE MOUNTING HOLE DIAMETER | 0.141 INCHES NOMINAL |
| BXCD | DISTANCE FROM FLANGE TO END | 0.422 INCHES NOMINAL |
| BXCW | LOAD/FREQUENCY RANGE | RATED AT 1 LB LOAD FOR 15 TO 30 CPS |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.406 INCHES NOMINAL |