Part Number
Part Number:
NSN:
NIIN:
Item Name:
SCREW ASSEMBLY , PANEL
Definition:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
CAGE Information
| Code | Company |
|---|---|
| 96214 | RAYTHEON COMPANY |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASB | FASTENER LENGTH | 0.525 INCHES MINIMUM AND 0.545 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 STAND-OFF |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| MATT | MATERIAL | STEEL COMP 305 FASTENER OR STEEL COMP 316 FASTENER OR STEEL COMP 302 FASTENER OR STEEL COMP 347 FASTENER OR STEEL COMP 304 FASTENER OR STEEL COMP 321 FASTENER OR STEEL COMP 384 FASTENER OR STEEL COMP 385 FASTENER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 2A |
| SFTT | SURFACE TREATMENT | PASSIVATE FASTENER |
| AGSM | MATERIAL ACCOMMODATED THICKNESS | 0.090 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASL | HEAD DIAMETER | 0.335 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | ANODIZE STAND-OFF |