National Stock Number (NSN) Output Data
Definition:
A FLAT METAL OR PLASTIC ITEM OF VARIOUS PERIPHERAL SHAPES HAVING A SOLID (NOT LAMINATED) CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. FOR ROUND ITEMS WITHOUT A HOLE HAVING A SOLID RECTANGULAR CROSS-SECTION USE DISK, SOLID, PLAIN. FOR ROUND OR HEXAGONAL ITEMS WITH ONLY ONE HOLE CENTRALLY LOCATED AND WITH THE LENGTH (THICKNESS) EXCEEDING 25 PERCENT OF THE OUTSIDE DIAMETER OR DISTANCE ACROSS PERIPHERAL FLATS, SEE SPACER, SLEEVE. THE THICKNESS BETWEEN THE TWO PARALLEL BEARING SURFACES MUST BE 0.006 INCH, (0.152 MM) OR MORE FOR ITEMS LESS THAN 1/4 INCH (6.35 MM) ACROSS THE PERIPHERAL DIAMETER, OR SMALLEST OVERALL OUTSIDE DIMENSION, OR MUST BE 0.016 INCH (0.406 MM) OR MORE FOR ITEMS 1/4 INCH (6.35 MM) OR GREATER ACROSS THE PERIPHERAL DIAMETER OR SMALLEST OVERALL OUTSIDE DIMENSION. FOR ITEMS WITH A THICKNESS LESS THAN THOSE INDICATED ABOVE, SEE SHIM. FOR ITEMS WITH ONE HOLE CENTRALLY LOCATED CONFORMING TO THE ABOVE DIMENSIONAL CRITERIA USE WASHER, FLAT OR SPACER, RING AS APPLICABLE. WHEN THICKNESS AND/OR OUTSIDE DIAMETER OR SMALLEST OVERALL OUTSIDE DIMENSION IS DESIGNATED AS A TOLERANCE/DIMENSION THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE. EXCLUDES GASKET; INSULATOR (AS MODIFIED) AND MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 211066361 | 53711 | A | 5 | 1 | A | ZZ | ||
| 585-6406618-25 | 53711 | A | 3 | 2 | A | ZZ | ||
| DF2081-239 FIND 25 | 43689 | A | 5 | 9 | A | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 43689 | HUNTINGTON INGALLS INCORPORATED DIV |
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
BUSHINGS, RINGS, SHIMS, AND SPAC
Inclusions:
INCLUDES EXTERNALLY THREADED RINGS; KEYED AND SERRATED LOCK RINGS; DEE RINGS; INSTRUMENT RETAINING RINGS; SHIM SETS AND ASSORTMENTS; PLATE SPACERS; RING SPACERS; SLEEVE SPACERS; STEPPED SPACERS; SPACER SETS AND ASSORTMENTS; SLEEVE BUSHINGS; MACHINE THREADED BUSHINGS; MACHINE THREADED PLUGS.
Exclusions:
EXCLUDES SLEEVE BEARINGS (FSC 3120); PIPE THREADED PLUGS (FSC 4730); PISTON RINGS (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, AND 4820); RETAINING RINGS (FSC 5325); SHIM STOCK (FSC 9515).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 41.970 INCHES MINIMUM AND 41.990 INCHES MAXIMUM |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.990 INCHES NOMINAL |
| AECS | BOLT HOLE QUANTITY | 16 |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.679 INCHES NOMINAL |
| ADUP | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.120 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | BOTH ENDS ALONG WIDTH TAPERED TO A NOMINAL THICKNESS OF 0.120 IN.; THERE IS ONE BOLT HOLE IN THE MIDDLE OF EACH END OF LENGTH WITH SEVEN EQUALLY SPACED ROWS OF TWO BOLT HOLES BETWEEN THEM ALONG THE LENGTH. |
| ADUQ | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.500 INCHES NOMINAL |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.500 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 5.000 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.859 INCHES MINIMUM AND 2.869 INCHES MAXIMUM |
| ADUM | OVERALL THICKNESS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
| MATT | MATERIAL | STEEL COMP 316L |