National Stock Number (NSN) Output Data
Definition:
A FLAT METAL OR PLASTIC ITEM OF VARIOUS PERIPHERAL SHAPES HAVING A SOLID (NOT LAMINATED) CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. FOR ROUND ITEMS WITHOUT A HOLE HAVING A SOLID RECTANGULAR CROSS-SECTION USE DISK, SOLID, PLAIN. FOR ROUND OR HEXAGONAL ITEMS WITH ONLY ONE HOLE CENTRALLY LOCATED AND WITH THE LENGTH (THICKNESS) EXCEEDING 25 PERCENT OF THE OUTSIDE DIAMETER OR DISTANCE ACROSS PERIPHERAL FLATS, SEE SPACER, SLEEVE. THE THICKNESS BETWEEN THE TWO PARALLEL BEARING SURFACES MUST BE 0.006 INCH, (0.152 MM) OR MORE FOR ITEMS LESS THAN 1/4 INCH (6.35 MM) ACROSS THE PERIPHERAL DIAMETER, OR SMALLEST OVERALL OUTSIDE DIMENSION, OR MUST BE 0.016 INCH (0.406 MM) OR MORE FOR ITEMS 1/4 INCH (6.35 MM) OR GREATER ACROSS THE PERIPHERAL DIAMETER OR SMALLEST OVERALL OUTSIDE DIMENSION. FOR ITEMS WITH A THICKNESS LESS THAN THOSE INDICATED ABOVE, SEE SHIM. FOR ITEMS WITH ONE HOLE CENTRALLY LOCATED CONFORMING TO THE ABOVE DIMENSIONAL CRITERIA USE WASHER, FLAT OR SPACER, RING AS APPLICABLE. WHEN THICKNESS AND/OR OUTSIDE DIAMETER OR SMALLEST OVERALL OUTSIDE DIMENSION IS DESIGNATED AS A TOLERANCE/DIMENSION THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE. EXCLUDES GASKET; INSULATOR (AS MODIFIED) AND MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 4M49A4DM12P2 | 76301 | A | 3 | 2 | 1 | ZZ | ||
| 4M49 | 76301 | A | D | 9 | 1 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 76301 | BOEING COMPANY THE DBA BOEING |
Federal Supply Class
Title
BUSHINGS, RINGS, SHIMS, AND SPAC
Inclusions:
INCLUDES EXTERNALLY THREADED RINGS; KEYED AND SERRATED LOCK RINGS; DEE RINGS; INSTRUMENT RETAINING RINGS; SHIM SETS AND ASSORTMENTS; PLATE SPACERS; RING SPACERS; SLEEVE SPACERS; STEPPED SPACERS; SPACER SETS AND ASSORTMENTS; SLEEVE BUSHINGS; MACHINE THREADED BUSHINGS; MACHINE THREADED PLUGS.
Exclusions:
EXCLUDES SLEEVE BEARINGS (FSC 3120); PIPE THREADED PLUGS (FSC 4730); PISTON RINGS (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, AND 4820); RETAINING RINGS (FSC 5325); SHIM STOCK (FSC 9515).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STYL | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.500 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 250/5 FED SPEC SINGLE MATERIAL RESPONSE |
| ABMK | OVERALL WIDTH | 0.486 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY: SPACER, PLATE |
| AGAV | END ITEM IDENTIFICATION | SPACER, PLATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 85582 MIL SPEC SINGLE TREATMENT RESPONSE |
| AECS | BOLT HOLE QUANTITY | 2 |
| ADUM | OVERALL THICKNESS | 0.063 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PRIMER |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.310 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.260 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.356 INCHES MINIMUM AND 0.366 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | BUNPRIMED ALUMINUM ALLOY AND CRES SHIMS HAVE BEEN SUPERCEDED BY PRIMED SHIMS. UNPRIMED SHIMS MAY BE REWORKED BY PRIMING IN ACCORDANCE WITH PARA 3.3.2 OR 3.3.3. 48 INCH STOCK LENGTHS ARE STANDARD. |
| ADVJ | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.258 INCHES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |