Part Number
Part Number:
NSN:
NIIN:
Item Name:
CYLINDER ASSEMBLY , HYDRAULIC BRAK
Definition:
A DEVICE CONSISTING OF A CYLINDER, HYDRAULIC BRAKE, WHEEL WITH A PISTON(S) AND OTHER COMPONENT PARTS WHICH IS MOUNTED TO THE BACK PLATE OF A WHEEL. IT USES THE FLOW AND PRESSURE OF A FLUID TO CREATE THE LINEAR MOTION REQUIRED TO OPERATE THE BRAKE SHOES OF A HYDRAULIC BRAKE SYSTEM.
CAGE Information
| Code | Company |
|---|---|
| 23862 | MILITARY VEHICLES OPN GENERAL MOTORS |
Federal Supply Class
Title
VEHICULAR BRAKE, STEERING, AXLE,
Inclusions:
INCLUDES TURRENT BRAKES; CLUTCH BRAKES, TANK TURRET.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CLMX | PORT THREAD DIAMETER | 0.375 INCHES NOMINAL |
| ABDR | MOUNTING PROVISION | THREADED MOUNTING HOLES |
| CLLZ | SECOND PISTON ROD END LUBRICATION FACILITY (NON-CORE) | NOT INCLUDED |
| BBJX | MOUNTING POSITION | RIGHT |
| CDTG | MOUNTING FACILITY THREAD QUANTITY PER INCH | 18 |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF |
| CLMS | PORT LOCATION AND QUANTITY | 1 CENTER SECTION |
| AKBN | MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| AJFY | SEAT ANGLE IN DEG | 45.0 |
| ATEM | EXTENDED LENGTH | 3.180 INCHES NOMINAL |
| ASBP | BORE TYPE | STRAIGHT |
| CDTF | MOUNTING FACILITY THREAD DIAMETER | 0.312 INCHES NOMINAL |
| AAFZ | BODY MATERIAL | STEEL |
| CLNB | PORT THREAD CLASS | 2B |
| CLMT | PORT STYLE | INVERTED FLARE |
| ABXV | BORE DIAMETER | 1.000 INCHES NOMINAL |
| CDTD | MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION |
| ABMK | OVERALL WIDTH | 2.375 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.816 INCHES NOMINAL |
| CLMY | PORT THREAD QUANTITY PER INCH | 24 |
| AMQZ | COMPRESSED LENGTH | 3.180 INCHES NOMINAL |
| CKSD | DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| CBBL | FEATURES PROVIDED | RUBBER BOOT |
| CLND | BLEEDING FEATURE QUANTITY | 1 |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 1.614 INCHES MINIMUM |
| ABJH | TEMP RATING | NOT RATED |
| CLLN | FIRST PISTON ROD END LUBRICATION FACILITY (NON-CORE) | NOT INCLUDED |
| CLMN | MOUNTING FACILITY THREAD LENGTH | 0.375 INCHES NOMINAL |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 1.634 INCHES MAXIMUM |
| AKBM | MOUNTING FACILITY THREAD CLASS | 2B |