National Stock Number (NSN) Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 88755 | 01121 | A | C | 1 | 5 | ZZ | AC | |
| JJC88755 | 01121 | A | 5 | 9 | 5 | TX | ||
| JJC88755 | 12697 | A | 5 | 2 | 5 | ZZ | ||
| 138-063-0004 | 95542 | A | 3 | 2 | 1 | TX |
CAGE Information
| Code | Company |
|---|---|
| 01121 | ROCKWELL AUTOMATION INC. |
| 12697 | CLAROSTAT SENSORS AND CONTROLS |
| 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGQL | UNDERCUT LENGTH | 0.550 INCHES NOMINAL |
| AEDQ | UNDERCUT DIAMETER | 0.063 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, STEPPED |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| TEST | TEST DATA DOCUMENT | 95542-138-063 DRAWING |
| ABXF | SHAFT LENGTH | 1.100 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| AAPN | SECTION QUANTITY | 2 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| ADAQ | BODY LENGTH | 1.266 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ADAV | OVERALL DIAMETER | 1.156 INCHES MAXIMUM |
| ABNC | FLAT HEIGHT | 0.094 INCHES MINIMUM AND 0.216 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.5 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| ABWV | SHAFT DIAMETER | 0.125 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AEFP | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.156 INCHES MAXIMUM |
| CSDL | STANDARD TAPER CURVE PER SECTION | A ALL SECTIONS |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| ABHP | OVERALL LENGTH | 2.766 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |