National Stock Number (NSN) Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 255-00HS2K | 0EBU2 | F | 3 | 9 | 1 | TX | ||
| 255-00HS2K | 94271 | A | 5 | 9 | 1 | TX | ||
| 1867852-8 | 55972 | A | 7 | 2 | 1 | TX |
CAGE Information
| Code | Company |
|---|---|
| 0EBU2 | VAMISTOR/WESTON DIV OF VAMISTOR CORP |
| 94271 | LOCKHEED MARTIN CORPORATION DBA LOCK |
| 55972 | HONEYWELL INTL INC DEFENSE AVIONICS |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ADAQ | BODY LENGTH | 0.410 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.411 INCHES MINIMUM AND 0.426 INCHES MAXIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION |
| ADAU | BODY HEIGHT | 0.375 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABKW | OVERALL HEIGHT | 0.375 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.150 INCHES NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 8000.0 NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION |
| AEFK | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.150 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| ABTB | MOUNTING HOLE DIAMETER | 0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| ABWV | SHAFT DIAMETER | 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| ABHP | OVERALL LENGTH | 0.582 INCHES MINIMUM AND 0.612 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| ABXF | SHAFT LENGTH | 0.035 INCHES MAXIMUM |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |