National Stock Number (NSN) Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| MIL-R-39035/1 | 81349 | M | 4 | 1 | E | TX | ||
| MILR39035-1 | 81349 | M | 5 | 9 | 3 | TX | ||
| RJR12FY502R | 81349 | M | 2 | 2 | E | TX | ||
| RJR12FY502M | 81349 | M | 5 | 9 | 3 | TX | ||
| RH502M | 01121 | A | E | 8 | 3 | TX | ||
| RJR12FY502P | 81349 | M | 5 | 9 | E | TX |
CAGE Information
| Code | Company |
|---|---|
| 01121 | ROCKWELL AUTOMATION INC. |
| 81349 | MILITARY SPECIFICATIONS PROMULGATED |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 7TH SECONDARY QUALITY |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39035/1 GOVERNMENT SPECIFICATION |
| AAPN | SECTION QUANTITY | 1 |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| ADAT | BODY WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | ACMI AIM7SYS |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ADAQ | BODY LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| AEFL | MAXIMUM RUNNING TORQUE | 8.00 INCH-OUNCES |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
| CBME | CUBIC MEASURE | 0.075 CUBIC INCHES |
| ABXF | SHAFT LENGTH | 0.036 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| ABTB | MOUNTING HOLE DIAMETER | 0.088 NOMINAL MILS AND 0.098 NOMINAL CENTIMETERS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.290 NOMINAL MILS AND 0.310 NOMINAL CENTIMETERS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AEFK | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ABJT | TERMINAL LENGTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/+100.0 SINGLE SECTION |
| ADAU | BODY HEIGHT | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |