National Stock Number (NSN) Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FINCTIONAL TOLERANCE (LINEARITY) OF THE OUTPUT IS EQUAL TO OR LESS THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSTIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE REHOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| XF6655-10 | 25413 | A | 5 | 2 | 5 | TX | ||
| 704AS3644 | 30003 | A | 3 | 2 | A | TX | ||
| LMFL1-220 | 08815 | A | 5 | 2 | 5 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 08815 | HONEYWELL INTERNATIONAL INC DBA HONE |
| 25413 | BETATRONIX DE LLC |
| 30003 | NAVAL AIR SYSTEMS COMMAND |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AEFW | LONGITUDINAL ACTUATOR EFFECTIVE ELECTRICAL STROKE LENGTH | 0.840 NOMINAL INCHES |
| AAPN | SECTION QUANTITY | 1 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| ADAQ | BODY LENGTH | 1.740 INCHES NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.80/+0.80 SINGLE SECTION |
| AEDX | SHAFT STYLE | ROUND, THREADED |
| ABWV | SHAFT DIAMETER | 0.094 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.114 NOMINAL INCHES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK ALL PRIMARIES |
| ADAT | BODY WIDTH | 0.330 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| FEAT | SPECIAL FEATURES | 12 INCHES TEFLON INSULATED LEADS |
| AGAV | END ITEM IDENTIFICATION | HARM MISSLE ASSEMBLY |
| AEFT | LONGITUDINAL ACTUATOR TRAVEL | 0.84 NOMINAL INCHES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.250 INCHES NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 30003-704AS3644 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| CBME | CUBIC MEASURE | 0.413 CUBIC INCHES |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.6 7TH SECONDARY QUALITY |
| ADAU | BODY HEIGHT | 0.575 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.375 INCHES MINIMUM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 100.0 SINGLE SECTION |
| ABXF | SHAFT LENGTH | 1.340 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |