National Stock Number (NSN) Output Data
Definition:
AN ITEM FABRICATED IN THE FORM OF AN ELBOW AND HAVING BOTH ENDS THREADED FEMALE, OR WITH UNTHREADED CONNECTING FACILITIES ON BOTH ENDS, OR CONNECTING FACILITIES ON BOTH ENDS, ONE OF WHICH IS A MALE THREAD WITHOUT BOSS OR SHOULDER. IF A LOCKNUT OR BONDNUT IS INCLUDED, IT SHALL NOT BE CONSIDERED AS A THREAD BOSS OR SHOULDER. IT IS PRIMARILY INTENDED TO CONNECT CONDUIT TO CONDUIT. IT MAY HAVE A REMOVABLE COVER TO FACILITATE PULLING WIRES, BUT DOES NOT INCLUDE FACILITIES FOR MOUNTING WIRING DEVICES. FOR ITEMS HAVING A REMOVABLE COVER TO FACILITATE PULLING WIRES AND SPECIFICALLY DESIGNED FOR CLOSE INSTALLATION IN EXPOSED OUTDOOR LOCATIONS AND WHICH MAY HAVE FACILITIES FOR AN OUTSIDE DRIVEN GROUND, SEE ENTRANCE ELBOW, ELECTRICAL. FOR ITEMS WITH ONE END HAVING A MALE THREAD WITH A BOSS OR SHOULDER, SEE BOX CONNECTOR, ELECTRICAL. FOR ITEMS HAVING A REMOVABLE SCREW CAP FOR PULLING WIRES, WITH THE CAP POSITIONED 45 DEGREES FROM THE CONNECTION FACILITIES, SEE ENTRANCE ELBOW, ELECTRICAL. FOR ITEMS FABRICATED IN THE FORM OF AN ELBOW HAVING BOTH ENDS THREADED MALE, SEE BEND, ELECTRICAL CONDUIT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| ELM90-100 | 03743 | A | 3 | 2 | 5 | ZZ | ||
| ELM90-100 | 15235 | A | 5 | 9 | 5 | ZZ | ||
| 4SE00437-1 | 28638 | A | 5 | 9 | 1 | ZZ | ||
| 4SE00437 | 80020 | A | D | 9 | 1 | ZZ | ||
| 4SE00437-1 | 80020 | A | 7 | 2 | 1 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 03743 | EGS ELECTRICAL GROUP APPLETON DIV |
| 15235 | CROUSE-HINDS CO |
| 28638 | NAVAL AIR WARFARE CENTER AIRCRAFT DI |
| 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DI |
Federal Supply Class
Title
ELECTRICAL HARDWARE AND SUPPLIES
Inclusions:
INCLUDES CONDUIT; RACEWAYS; FACE PLATES; CONDULETS; OUTLET AND JUNCTION BOXES; POLE LINE HARDWARE, NOT ELSEWHERE CLASSIFIABLE.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQMQ | LEG END TO PLANE OF BEND DISTANCE | 1.500 INCHES NOMINAL SECOND END |
| SFTT | SURFACE TREATMENT | CADMIUM OR ZINC |
| MATT | MATERIAL | IRON MALLEABLE |
| AELS | CONDUIT TYPE ACCOMMODATED | ANY ACCEPTABLE SINGLE END |
| ADTS | CONSTRUCTION TYPE | ONE PIECE |
| AGAV | END ITEM IDENTIFICATION | JET ENGINE TEST INSTRUMENT CONDUIT ASSY |
| APTD | END TYPE | EXTERNAL THREAD FIRST END |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| APTD | END TYPE | EXTERNAL THREAD SECOND END |
| ABEX | DEFLECTION ANGLE | 90.0 DEGREES |
| CQMQ | LEG END TO PLANE OF BEND DISTANCE | 1.500 INCHES NOMINAL FIRST END |
| STYL | STYLE DESIGNATOR | PULLING-SIDE OPENING |