Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 71450 | CTS CORP |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| ADAQ | BODY LENGTH | 0.415 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ADAV | OVERALL DIAMETER | 0.500 INCHES NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES |
| ADAP | MOUNTING BUSHING LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0/+250.0 SINGLE SECTION |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 0.484 NOMINAL MILS AND 0.516 NOMINAL CENTIMETERS |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 292.0 MINIMUM AND 298.0 MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 292.0 MINIMUM AND 298.0 MAXIMUM |
| ABXF | SHAFT LENGTH | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 125.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-23285/3 GOVERNMENT SPECIFICATION |
| AEFP | NONTURN DEVICE RADIUS | 0.245 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 7TH SECONDARY QUALITY |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| AEFL | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-23285 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AEFN | NONTURN DEVICE LOCATION | AT 4'30 OCLOCK AND AT 10'30 OCLOCK |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 GALLONS PER MINUTE C AND BETTER FLOORING |