Part Number
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code | Company |
|---|---|
| 83330 | DIALIGHT CORPORATION |
Federal Supply Class
Title
LUGS, TERMINALS, AND TERMINAL ST
Inclusions:
INCLUDES BINDING POSTS; BATTERY CLIPS; STUD TERMINALS; TEST CLIPS.
Exclusions:
EXCLUDES CAPS, ELECTRICAL; CLIPS, ELECTRICAL; AND CONTACTS, ELECTRICAL.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPB | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1100.0 |
| ABGS | BASE THICKNESS | 0.250 INCHES |
| CQCW | FEEDTHRU CONNECTION END TYPE | 211 FOURTH COMBINATION BOTH ENDS |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| ABGQ | BOARD OVERALL HEIGHT | 0.906 INCHES |
| ABCS | TERMINAL ROW QUANTITY | 1 |
| ABDU | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.750 INCHES |
| AMPS | CURRENT RATING IN AMPS | 15.0 |
| CSCS | NONFEEDTHRU TERMINAL QUANTITY | 9 SINGLE |
| AAMA | MOUNTING HOLE DIAMETER | 0.160 INCHES |
| CQCW | FEEDTHRU CONNECTION END TYPE | F4 15TH MATERIAL RESPONSE BOTH ENDS |
| CRZR | FEEDTHRU TERMINAL QUANTITY | 9 SINGLE COMBINATION |
| CRNL | NONFEEDTHRU TERMINAL TYPE | 857 SINGLE |
| CWLG | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW |
| ABCT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.375 INCHES |
| ABGN | BOARD OVERALL LENGTH | 4.031 INCHES |
| ABGP | BOARD OVERALL WIDTH | 0.875 INCHES |
| MATT | MATERIAL | COPPER ALLOY TERMINALS |
| ABGR | BOARD HEIGHT EXCLUDING TERMINALS | 0.406 INCHES |
| ABCX | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP |
| SFTT | SURFACE TREATMENT | NICKEL TERMINALS |
| MATT | MATERIAL | PLASTIC PHENOLIC BOARD |
| ABDW | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.281 INCHES |
| CWLN | TERMINAL DESIGN | FEEDTHRU |
| ABDX | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.140 INCHES |
| ABDV | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.312 INCHES |
| AAQL | BODY STYLE | BARRIER TYPE |