Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 54089 | DRS C3 & AVIATION COMPANY |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASL | HEAD DIAMETER | 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.312 INCHES NOMINAL |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASA | THREAD LENGTH | 0.142 INCHES NOMINAL |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.097 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| MATT | MATERIAL | STEEL COMP 316 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 384 OVERALL OR STEEL COMP 314 OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 317 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 301 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 308 OVERALL OR STEEL COMP 309S OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 310S OVERALL OR STEEL COMP 316L OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 348 OVERALL OR STEEL COMP 302B OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 385 OVERALL |
| AAWC | FIRST DIAMETER FROM HEAD | 0.089 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 2A |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 40 |