Part Number
Part Number:
NSN:
NIIN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code |
Company |
| 83330 |
DIALIGHT CORPORATION |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABGS |
BASE THICKNESS |
0.250 INCHES |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE |
| ABGQ |
BOARD OVERALL HEIGHT |
0.906 INCHES |
| ABCS |
TERMINAL ROW QUANTITY |
1 |
| ABGN |
BOARD OVERALL LENGTH |
3.656 INCHES |
| ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
3.375 INCHES |
| AMPS |
CURRENT RATING IN AMPS |
15.0 |
| CRZR |
FEEDTHRU TERMINAL QUANTITY |
8 SINGLE COMBINATION |
| CQCW |
FEEDTHRU CONNECTION END TYPE |
F4 15TH MATERIAL RESPONSE BOTH ENDS |
| AAMA |
MOUNTING HOLE DIAMETER |
0.170 INCHES |
| CWLG |
TERMINAL PATTERN ARRANGEMENT |
SINGLE ROW |
| ABCT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.375 INCHES |
| ABGP |
BOARD OVERALL WIDTH |
0.875 INCHES |
| MATT |
MATERIAL |
COPPER ALLOY TERMINALS |
| ABGR |
BOARD HEIGHT EXCLUDING TERMINALS |
0.406 INCHES |
| SFTT |
SURFACE TREATMENT |
SOLDER TERMINALS AND TIN TERMINALS |
| CQCW |
FEEDTHRU CONNECTION END TYPE |
F14 FOURTH COMBINATION BOTH ENDS |
| ABCX |
BOARD CONSTRUCTION |
HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP |
| MATT |
MATERIAL |
PLASTIC PHENOL-FORMALDEHYDE BOARD |
| CWLN |
TERMINAL DESIGN |
FEEDTHRU |
| ABDV |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
0.312 INCHES |
| AAPB |
DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS |
3300.0 |
| ABDX |
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY |
0.141 INCHES |
| ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.188 INCHES |
| AAQL |
BODY STYLE |
BARRIER TYPE |
Similar Parts