Part Number
Part Number:
NSN:
NIIN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code |
Company |
| 26405 |
MARATHON SPECIAL PRODUCTS CORPORATIO |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-P-19833,TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE BOARD |
| ABCS |
TERMINAL ROW QUANTITY |
2 |
| CWLG |
TERMINAL PATTERN ARRANGEMENT |
MULTI-ROW |
| ABCU |
DISTANCE BETWEEN TERMINAL ROW CENTERS |
0.312 INCHES |
| CWLN |
TERMINAL DESIGN |
NONFEEDTHRU |
| AAMA |
MOUNTING HOLE DIAMETER |
0.170 INCHES |
| ABCT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.375 INCHES |
| ABGP |
BOARD OVERALL WIDTH |
0.875 INCHES |
| ABGR |
BOARD HEIGHT EXCLUDING TERMINALS |
0.406 INCHES |
| ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
7.125 INCHES |
| MATT |
MATERIAL |
PLASTIC DIALLYL PHTHALATE BOARD AND GLASS FIBER BOARD |
| ABGN |
BOARD OVERALL LENGTH |
8.156 INCHES |
| ABDB |
TERMINAL FACILITY QUANTITY |
20 |
| ABDV |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
0.312 INCHES |
| ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.187 INCHES |
| AAQL |
BODY STYLE |
BARRIER TYPE |
Similar Parts