Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 76040 |
MACK TRUCKS INC PARTS OPN |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAHX |
SECOND END GROOVE DIAMETER |
0.7340 INCHES NOMINAL |
| BDSR |
SECOND END SPLINE QUANTITY |
20 |
| AMGB |
SECOND END SPLINE MINOR DIAMETER |
0.8810 INCHES NOMINAL |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES |
| AMCY |
FIRST END DISTANCE FROM END TO GROOVE |
0.292 INCHES NOMINAL |
| AMGA |
SECOND END SPLINE LENGTH |
1.156 INCHES NOMINAL |
| CSPY |
LARGEST STEP DIAMETER |
1.247 INCHES MINIMUM AND 1.248 INCHES MAXIMUM |
| AAHP |
SECOND END STYLE |
CIRCULAR GROOVED AND SPLINED (STRAIGHT) |
| AMFQ |
SECOND END DISTANCE FROM END TO GROOVE |
0.391 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
19.590 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
CIRCULAR GROOVED |
| AMDL |
FIRST END DIAMETER |
1.2475 INCHES MINIMUM AND 1.2485 INCHES MAXIMUM |
| AAHG |
FIRST END GROOVE WIDTH |
0.1880 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 |
| AMFZ |
SECOND END DIAMETER |
0.9895 INCHES NOMINAL |
| ATPC |
STEP QUANTITY |
2 |
| AAHH |
FIRST END GROOVE DIAMETER |
1.0020 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-633 FED SPEC ALL MATERIAL RESPONSES |
| AAHW |
SECOND END GROOVE WIDTH |
0.4060 INCHES NOMINAL |
| AMGC |
SECOND END SPLINE MAJOR DIAMETER |
0.9895 INCHES NOMINAL |
Similar Parts