Part Number
Part Number:
NSN:
NIIN:
Item Name:
BRACKET , DOUBLE ANGLE
Definition:
A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH ARE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
HARDWARE, COMMERCIAL
Inclusions:
INCLUDES ACCESS COVERS; BUMPERS; CASTERS; CABINET AND DOOR HARDWARE; CLEVISES; HINGES; LATCHES; STRAPS AND STRAPPING; TURNBUCKLES; WEBBED STRAPS.
Exclusions:
EXCLUDES WEAPONS SYSTEM HARDWARE (FSC 5342).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| ADLL | SECOND LEG LENGTH | 1.125 INCHES NOMINAL |
| AHPZ | CENTER SECTION HEIGHT | 1.188 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.250 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.375 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.347 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 13.000 INCHES NOMINAL |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| AHLN | SECOND LEG HOLE DIAMETER | 0.312 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 10.500 INCHES NOMINAL |
| AHQZ | FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 4.000 INCHES NOMINAL |
| AHQY | FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 3.250 INCHES NOMINAL |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| AHLU | SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 4.500 INCHES NOMINAL |
| ADLK | FIRST LEG LENGTH | 1.125 INCHES NOMINAL |
| AHQB | CENTER SECTION THICKNESS | 0.375 INCHES NOMINAL |
| AKBU | SECOND LEG STYLE | SQUARE |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 316 |
| AJZU | FIRST LEG STYLE | SQUARE |
| AHQN | FIRST LEG WIDTH | 13.000 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL |
| AHQA | CENTER SECTION WIDTH | 13.000 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | ADJACENT ANGLES |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 12.000 INCHES NOMINAL |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| ACHY | MOUNTING HOLE TYPE | PLAIN AND THREADED |