Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 1FJ15 | EMHART INDUSTRIES AMATOM ELECTRONICS |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAWC | FIRST DIAMETER FROM HEAD | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AAWC | FIRST DIAMETER FROM HEAD | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AASK | HEAD STYLE | KNURLED NO. 1 |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| FEAT | SPECIAL FEATURES | POINT STYLE NO. 6,0.078 IN. MIN,0.120 IN. MAX LG 85 TO 95 DEG CHAMFER ANGLE,0.104 IN. MIN,0.120 IN. MAX DIA |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 0.672 INCHES MINIMUM AND 0.687 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASA | THREAD LENGTH | 0.202 INCHES MINIMUM AND 0.212 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 2A |
| AASL | HEAD DIAMETER | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASU | HEAD HEIGHT | 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.372 INCHES MINIMUM AND 0.392 INCHES MAXIMUM |