Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 06481 | NORTHROP GRUMMAN GUIDANCE AND ELECTR |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNS |
| ASDB | WIDTH ACROSS FLATS | 0.500 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJE | THREAD PITCH DIAMETERS | +0.4213/+0.4243 INCHES |
| ADBG | NUT THICKNESS | 0.125 INCHES NOMINAL |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES |
| AZKQ | TEMP RATING | NOT RATED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ACTD | NUT DIAMETER | 0.520 INCHES NOMINAL |
| ACTA | NUT STYLE | ROUND |
| CRSQ | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL NUT |
| AAWY | COUNTERBORE DIAMETER | 0.444 INCHES MINIMUM NUT |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| ADFK | NUT COUNTERBORE DEPTH | 0.025 INCHES MINIMUM NUT AND 0.030 INCHES MAXIMUM NUT |
| CMLP | THREAD QUANTITY PER INCH | 40 |