Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 06540 | NEW HAVEN MFG CORP AMATOM ELECTRONIC |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASU | HEAD HEIGHT | 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| AASK | HEAD STYLE | KNURLED NO. 1 |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| AASB | FASTENER LENGTH | 0.703 INCHES MINIMUM AND 0.734 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.266 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 E-300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 2A |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.406 INCHES MINIMUM AND 0.468 INCHES MAXIMUM |
| AAWC | FIRST DIAMETER FROM HEAD | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |