Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 19204 | ARMY UNITED STATES DEPARTMENT OF THE |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.5500 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMGA | SECOND END SPLINE LENGTH | 2.500 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.585 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.500 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.5450 INCHES NOMINAL |
| BDSR | SECOND END SPLINE QUANTITY | 4 |
| AAGZ | FIRST END STYLE | EXTERNAL THREADED |
| AMDL | FIRST END DIAMETER | 0.3125 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.5850 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 2 |
| MATT | MATERIAL | STEEL |
| AMHD | SECOND END HOLE DEPTH | 0.550 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.310 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.1200 INCHES NOMINAL |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.380 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 1015003229728 HOW M101 |
| AAHP | SECOND END STYLE | CROSS DRILLED HOLE AND SPLINED (STRAIGHT) |