Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 97424 | AMETEK INC. DIV AEROSPACE & DEFENSE |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CBME | CUBIC MEASURE | 0.011 CUBIC INCHES |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 NOMINAL MILS AND 0.105 NOMINAL CENTIMETERS |
| AAPN | SECTION QUANTITY | 1 |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AXGY | MOUNTING METHOD | TERMINAL |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39035/3 GOVERNMENT SPECIFICATION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| ABXF | SHAFT LENGTH | 0.050 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AAQL | BODY STYLE | RECTANGULAR |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| ADAT | BODY WIDTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 4320.0 NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM AND 9000.0 MAXIMUM |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ADAU | BODY HEIGHT | 0.155 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/+100.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 7TH SECONDARY QUALITY |
| APXH | TERMINAL LOCATION | RIGHT ADJACENT SIDE TWO ROWS |