Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 02111 | VISHAY THIN FILM LLC DBA VISHAY SPEC |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 7TH SECONDARY QUALITY |
| CBME | CUBIC MEASURE | 0.011 CUBIC INCHES |
| AAPN | SECTION QUANTITY | 1 |
| ADAQ | BODY LENGTH | 0.165 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ABJT | TERMINAL LENGTH | 0.312 INCHES MINIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AXGY | MOUNTING METHOD | TERMINAL |
| ABPM | BODY DIAMETER | 0.235 NOMINAL MILS AND 0.265 NOMINAL CENTIMETERS |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0/+20.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 270.0 NOMINAL |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFD | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| AAQL | BODY STYLE | CYLINDRICAL |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 NOMINAL MILS AND 0.110 NOMINAL CENTIMETERS |
| FEAT | SPECIAL FEATURES | SEALED TO PERMIT CLEANING IN COMMON SOLVENTS |
| APXH | TERMINAL LOCATION | REAR END |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| AEFM | MAXIMUM STOP TORQUE | 6.00 INCH-OUNCES |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| AEFN | NONTURN DEVICE LOCATION | AT 12 OCLOCK |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 215.0 MINIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/+100.0 SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 OHMS C AND BETTER FLOORING |
| AEFP | NONTURN DEVICE RADIUS | 0.125 INCHES NOMINAL |