Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 13297 | MAGNASYNC/MOVIOLA CORPORATION |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AASB | FASTENER LENGTH | 0.437 INCHES NOMINAL |
| AASK | HEAD STYLE | KNURLED NO. 4 |
| AASA | THREAD LENGTH | 0.187 INCHES MINIMUM |
| AASU | HEAD HEIGHT | 0.437 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| MATT | MATERIAL | STEEL COMP 302 OVERALL |
| AAWC | FIRST DIAMETER FROM HEAD | 0.150 INCHES NOMINAL |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.250 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJD | THREAD CLASS | 2A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASL | HEAD DIAMETER | 0.562 INCHES NOMINAL |