Part Number
Part Number:
NSN:
NIIN:
Item Name:
NUT , PLAIN , SPLINE
Definition:
A NUT HAVING AN EXTERNALLY SPLINED SLEEVE WHICH HOLDS IT IN POSITION WHEN FORCED INTO A HOLE OF SLIGHTLY SMALLER DIAMETER.
CAGE Information
| Code | Company |
|---|---|
| 06540 | NEW HAVEN MFG CORP AMATOM ELECTRONIC |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADFK | NUT COUNTERBORE DEPTH | 0.198 INCHES MINIMUM FIRST END AND 0.213 INCHES MAXIMUM FIRST END |
| ADFK | NUT COUNTERBORE DEPTH | 0.198 INCHES MINIMUM FIRST END AND 0.213 INCHES MAXIMUM FIRST END |
| ACTD | NUT DIAMETER | 0.309 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 302 OVERALL OR STEEL COMP 303 OVERALL |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | SPLINE |
| AZKQ | TEMP RATING | NOT RATED |
| AAVM | PILOT LENGTH | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.226 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE OVERALL OR ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR ASTM A276-55 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| AAWY | COUNTERBORE DIAMETER | 0.187 INCHES MINIMUM FIRST END AND 0.190 INCHES MAXIMUM FIRST END |
| ADEA | NUT HEIGHT | 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.164 INCHES |
| BZRR | THREAD SERIES | UNC |
| AAJD | THREAD CLASS | 2B |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CRSQ | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL SECOND END |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |