Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , AXLE , AUTOMOTIVE
Definition:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATL | MATERIAL | STEEL, QQ-S-624, FS4063-CANCELED OR STEEL, QQ-S-633, FS1045-CANCELED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| BNTQ | SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.438 INCHES NOMINAL |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTS | SECOND END FACILITY LOCATION | LOCATED AT SHAFT END |
| ZZZV | FSC APPLICATION DATA | CONTROLLED DIFFERENTIAL |
| AMQF | SECOND END TYPE | SPLINED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BNYS | FLANGE OVERALL THICKNESS | 0.812 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.438 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE AND 6 UNTHREADED HOLE |
| AMQA | FIRST END TYPE | FLANGED |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| ABUJ | THREAD SIZE | 3/8-16 |
| ABHP | OVERALL LENGTH | 26.531 INCHES MINIMUM AND 26.656 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.136 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 1.350 INCHES MINIMUM AND 1.352 INCHES MAXIMUM |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNPK | SECOND END FACILITY DIAMETER | ANY ACCEPTABLE |
| AHTC | FLANGE OUTSIDE DIAMETER | 4.745 INCHES MINIMUM AND 4.750 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | 1-1/4 IN. DIA OF PORTION OF SHAFT BETWEEN FLANGE AND SPLINE END |
| AETC | METALLIC HARDNESS RATING | 25.0 MINIMUM ROCKWELL C AND 60.0 MAXIMUM ROCKWELL C |
| BNTR | SECOND END FACILITY WIDTH | 0.250 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | ANY ACCEPTABLE |