Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 17472 | EATON CORPORATION DIV ELECTRICAL SEN |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| BDSR | SECOND END SPLINE QUANTITY | 15 |
| AMCX | FIRST END FLAT LENGTH | 0.600 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.187 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8690 MIL SPEC SINGLE MATERIAL RESPONSE |
| ABHP | OVERALL LENGTH | 5.059 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.3730 INCHES MINIMUM AND 0.3740 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | FLATTED |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| AMCW | FIRST END FLAT DEPTH | 0.4750 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| AMFZ | SECOND END DIAMETER | 0.5000 INCHES NOMINAL |
| ZZZV | FSC APPLICATION DATA | ACTUATOR,ELECTRO-MECHANICAL,ROTARY CANOPY |
| AMGA | SECOND END SPLINE LENGTH | 0.620 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 1.1870 INCHES NOMINAL |