Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 06481 | NORTHROP GRUMMAN GUIDANCE AND ELECTR |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.780 INCHES NOMINAL |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AMCW | FIRST END FLAT DEPTH | 0.0250 INCHES MINIMUM AND 0.0400 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,CL 303,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| AMFZ | SECOND END DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.224 INCHES MINIMUM AND 0.228 INCHES MAXIMUM |
| ZZZV | FSC APPLICATION DATA | COMPUTERS,NAVIGATION |
| AAGZ | FIRST END STYLE | FLATTED |
| FEAT | SPECIAL FEATURES | ENDS CHAMFERED 45.0 DEG AT 0.010 TO 0.030 IN. D |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AAHX | SECOND END GROOVE DIAMETER | 0.0805 INCHES MINIMUM AND 0.0835 INCHES MAXIMUM |
| AAHW | SECOND END GROOVE WIDTH | 0.0350 INCHES MINIMUM AND 0.0400 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 3 |
| CSPY | LARGEST STEP DIAMETER | 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| AMCX | FIRST END FLAT LENGTH | 0.560 INCHES NOMINAL |