Part Number
Definition:
A NUT, FLAT ON TOP AND BOTTOM HAVING 6 FLAT SIDES. FOR ITEMS WHICH HAVE INTERNAL TAPERED OR STRAIGHT (PARALLEL) PIPE THREADS, SPECIFIC ELECTRICAL CONDUIT SIZE DESIGNATION, AND WHICH WHEN INSTALLED, PROVIDE A METHOD OF TIGHTENING TO LOCK THE CONNECTION, SEE LOCKNUT, ELECTRICAL CONDUIT. SEE ALSO LOCKNUT, TUBE FITTING. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE WIDTH ACROSS THE FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. (WHEN HEIGHT OR THICKNESS AND/OR WIDTH ACROSS THE FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ALET | HOLE TYPE AND QUANTITY | 6 DRILLED |
| CQJX | NOMINAL THREAD SIZE | 1.125 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 8 |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-1222,TYPE III,GRADE 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ASDB | WIDTH ACROSS FLATS | 1.8125 INCHES NOMINAL |
| AZKQ | TEMP RATING | NOT RATED |
| AGAV | END ITEM IDENTIFICATION | SUBMARINE ENGINEERING AND DIESEL SYSTEMS |
| MATT | MATERIAL | STEEL OVERALL |
| ADEA | NUT HEIGHT | 1.1094 INCHES NOMINAL |
| ACTA | NUT STYLE | HEXAGON |
| FEAT | SPECIAL FEATURES | HOLES LOCATED 0.560 IN. FROM NUT FACE;0.125 IN. DEEP FROM CORNER |
| BZRR | THREAD SERIES | UNC |
| AAJD | THREAD CLASS | 2B |
| CRTM | BEARING SURFACE TYPE | FLAT |
| AGGP | DRILLED HOLE DIAMETER | 0.093 INCHES NOMINAL |