Part Number
Part Number:
NSN:
NIIN:
Item Name:
BRACKET , MOUNTING
Definition:
A BRACKET OF VARIOUS SHAPES (OTHER THAN ANGLE), DESIGNED TO BE ATTACHED TO A SUPPORTING SURFACE FOR THE SPECIFIC PURPOSE OF POSITIONING, ALIGNING AND/OR SUPPORTING ANOTHER ITEM. EXCLUDES BRACE (AS MODIFIED); BRACKET, ANGLE; AND BRACKET, DOUBLE ANGLE. SEE ALSO BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; AND RETAINER (AS MODIFIED).
CAGE Information
| Code | Company |
|---|---|
| 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
HARDWARE, COMMERCIAL
Inclusions:
INCLUDES ACCESS COVERS; BUMPERS; CASTERS; CABINET AND DOOR HARDWARE; CLEVISES; HINGES; LATCHES; STRAPS AND STRAPPING; TURNBUCKLES; WEBBED STRAPS.
Exclusions:
EXCLUDES WEAPONS SYSTEM HARDWARE (FSC 5342).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | BOTTOM FRONT EDGE IS CUT OFF 0.500 X 0.500 INCH ON EACH SIDE; MOUNTING HOLES ON FRONT ARE CENTERED 0.515 FROM TOP EDGE AND 1.625 FROM EACH SIDE; TOP HAS 2 HOLES THD FOR 0.375-16 UNC-2B HELICAL COIL INSERT (PER MS33537, ASSEMBLED WET) CENTERED 0.985 FROM FRONT EDGE AND 0.750 FROM EACH SIDE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209, TEMPER H32 ASSN STD SINGLE MATERIAL RESPONSE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, ISOLATOR TIE |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ABHP | OVERALL LENGTH | 9.000 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 1.970 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | ZINC |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541, CLASS 1A&&JBATT-P-645 MIL SPEC SINGLE TREATMENT RESPONSE |
| MATT | MATERIAL | ALUMINUM ALLOY 5086 |
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ABKW | OVERALL HEIGHT | 0.770 INCHES NOMINAL |