Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
| Code | Company |
|---|---|
| 56878 | SPS TECHNOLOGIES LLC DBA AEROSPACE D |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| ANEE | GRIP LENGTH | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CRSQ | COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL |
| SFTT | SURFACE TREATMENT | NICKEL OVERALL AND CADMIUM OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.625 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.843 INCHES MINIMUM AND 0.893 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.6235 INCHES MINIMUM AND 0.6245 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 1.791 INCHES MINIMUM AND 1.821 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| FEAT | SPECIAL FEATURES | BEARING SURFACE OF HEAD GROOVED TO 0.769 IN. MIN,0.771 IN. MAX DIA,0.155 IN. MIN,0.160 IN. MAX FROM TOP OF HEAD |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASL | HEAD DIAMETER | 1.007 INCHES MINIMUM AND 1.034 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |