Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 89926 | NEW HOLLAND CONSTRUCTION |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END |
| CQQN | EXTERNAL PROTECTION TYPE AND LOCATION | OVERALL SPRING GUARD, FLAT STEEL COIL |
| AAJD | THREAD CLASS | 1A 2ND END |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM OR COMPLETE FITTING ZINC |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 26.688 INCHES MINIMUM OVERALL AND 27.188 INCHES MAXIMUM OVERALL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 1/2 IN. SIZE |
| ABJH | TEMP RATING | -67.0 DEG FAHRENHEIT SINGLE RESPONSE AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.750 INCHES MINIMUM AND 0.812 INCHES MAXIMUM |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-13444 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQBD | BURST TEST PRESSURE | 750.0 POUNDS PER SQUARE INCH |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| CRSM | VACUUM IN TORR | 508.0 |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AHNC | CONNECTION STYLE | FLARED 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-H-13444 GOVERNMENT SPECIFICATION |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER ERR-100 |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 3.750 INCHES |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | HYDRAULIC SOLUTION RESISTANT AND OIL RESISTANT AND MILDEW RESISTANT AND FUEL RESISTANT AND OZONE RESISTANT |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| AAJD | THREAD CLASS | 2B 1ST END |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM OR COMPLETE FITTING ZINC |
| CRDW | HYDROSTATIC TEST PRESSURE | 375.0 POUNDS PER SQUARE INCH |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MOD BY END FITTINGS,EXTERNAL SUPPORT AND O/A LG |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |