Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 11201 | DEVAL CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDM | FIRST END SPLINE LENGTH | 3.500 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMFT | SECOND END KEYWAY DEPTH | 0.188 INCHES NOMINAL |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 1.312 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 1.2500 INCHES NOMINAL |
| AMFW | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 0.812 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.2500 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| ATPC | STEP QUANTITY | 2 |
| MATT | MATERIAL | STEEL |
| BDSQ | FIRST END SPLINE QUANTITY | 16 |
| AMFZ | SECOND END DIAMETER | 1.1875 INCHES NOMINAL |
| AAHP | SECOND END STYLE | INDENTED FLAT KEYWAY |
| AMFR | SECOND END KEYWAY WIDTH | 0.3125 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.250 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 11.875 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.0235 INCHES NOMINAL |