Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , AXLE , AUTOMOTIVE
Definition:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
CAGE Information
| Code | Company |
|---|---|
| 18894 | AIR ARMAMENT CENTER/ EN |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMHM | SECOND END DISTANCE FROM BEARING SEAT TO END | 2.750 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.495 INCHES NOMINAL |
| MATL | MATERIAL | STEEL,AISI 4130 OR STEEL,QQ-S-624 |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| AMHL | SECOND END BEARING SEAT DIAMETER | 1.312 INCHES NOMINAL |
| AMQF | SECOND END TYPE | SPLINED |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| BBCD | FIRST END SPLINE QUANTITY | 6 |
| BNTC | FIRST END FACILITY WIDTH | 0.125 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| BNTT | SECOND END BEARING SEAT | INCLUDED |
| AMQA | FIRST END TYPE | SPLINED |
| AMGA | SECOND END SPLINE LENGTH | 1.750 INCHES NOMINAL |
| BNTD | FIRST END FACILITY LOCATION | 1.250 IN. BETWEEN GROOVE AND SHOULDER,0.312 IN. FROM END OF SHAFT |
| BNPJ | FIRST END FACILITY DIAMETER | 1.031 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| BBCF | SECOND END SPLINE QUANTITY | 19 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| AMGF | SECOND END PITCH DIAMETER | 1.136 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.265 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 12.781 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 1.619 INCHES NOMINAL |
| AETC | METALLIC HARDNESS RATING | 42.0 MAXIMUM ROCKWELL C |
| BNTW | SECOND END BEARING SEAT WIDTH | 1.156 INCHES NOMINAL |
| BNTB | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE AND SHOULDER |