National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
SHAFT ASSEMBLY , FLEXIBLE
Definition:
AN ITEM CONSISTING OF A CASING WITH FITTINGS AND ATTACHMENTS ON EACH END AND A SPIRALLY WOUND WIRE CORE WITH FORMED END(S) AND/OR CRIMPED ON END FITTINGS. IT IS DESIGNED TO TRANSMIT ROTARY MOTION AROUND BENDS FROM A MOTOR OR OTHER POWER SOURCE TO DRIVE VARIOUS TYPES OF EQUIPMENT, SUCH AS TACHOMETERS, SPEEDOMETERS, REMOTE CONTROLS, INSTRUMENTS, AND THE LIKE, WHICH ARE LOCATED AT AN ANGLE AND/OR DISTANCE FROM THE POWER SOURCE. SEE ALSO CONTROL ASSEMBLY, PUSH-PULL.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 95000-64 | 57733 | A | 3 | 2 | X | XX |
CAGE Information
| Code | Company |
|---|---|
| 57733 | STEWART-WARNER CORPORATION |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CFRZ | CORE OVERALL LENGTH | 64.000 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.250 INCHES NOMINAL SECOND END |
| ADMS | WRENCHING FACILITY OUTSIDE DIAMETER | 0.938 INCHES NOMINAL FIRST END |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON SECOND END |
| AEDN | TIP LENGTH | 0.562 INCHES MINIMUM FIRST END AND 0.625 INCHES MAXIMUM FIRST END |
| APTD | END TYPE | ROUND KEYED FIRST END |
| ASDB | WIDTH ACROSS FLATS | 0.875 INCHES NOMINAL SECOND END |
| ABHP | OVERALL LENGTH | 64.000 INCHES NOMINAL |
| CFRP | CASING LENGTH BETWEEN FERRULES | 63.125 INCHES NOMINAL |
| BPPL | WRENCHING FACILITY TYPE | KNURLED SURFACE FIRST END |
| ABUJ | THREAD SIZE (NON-CORE) | ERR-070 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | STEWART WARNER SPECIAL SECOND END |
| CFRW | END OVERALL DIAMETER | 1.000 INCHES NOMINAL BOTH ENDS |
| ZZZV | FSC APPLICATION DATA | SPEEDOMETER GROUP,DUMP TRUCK |
| APJC | THREAD LOCATION | INTERNAL FIRST END |
| CFRM | TORSIONAL DEFLECTION RATING | 25 DEG FT-LB IN. |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL FIRST END |
| CFRQ | CASING OUTSIDE DIAMETER | 0.243 INCHES NOMINAL |
| CFSM | STRENGTH RATING CHARACTERISTICS (NON-CORE) | 10.0 POUNDS TORSION STRENGTH WINDING DIRECTION |
| AKMH | CORE DIAMETER | 0.130 INCHES NOMINAL |
| BJPS | CASING MATERIAL | STEEL |
| AJXJ | CORE MATERIAL | STEEL |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.201 INCHES FILTER HOUSING LEFT SIDE ANY ACCEPTABLE FIRST END AND 0.205 INCHES ONE WASHER SWAGED TO SLEEVE ANY ACCEPTABLE FIRST END |
| AAJD | THREAD CLASS | 2 SECOND END |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.375 INCHES NOMINAL FIRST END |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.625 INCHES NOMINAL SECOND END |
| AWZY | END CONNECTION TYPE | THREADED EXTERNAL SECOND END |
| AECT | THREAD DEPTH | 0.250 INCHES NOMINAL FIRST END |
| APJC | THREAD LOCATION | EXTERNAL SECOND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.101 INCHES BOTTOM HALF NOT APPLICABLE SECOND END AND 0.104 INCHES SIDE WAIST NOT APPLICABLE SECOND END |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFRN | CASING SURFACE TREATMENT | GALVANIZED |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CFRT | SWIVEL END | PROVIDED BOTH ENDS |
| APTD | END TYPE | SQUARE MALE SECOND END |
| AEDN | TIP LENGTH | 0.125 INCHES MINIMUM SECOND END AND 0.250 INCHES MAXIMUM SECOND END |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| AAJD | THREAD CLASS | 2B FIRST END |