Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 30003 | NAVAL AIR SYSTEMS COMMAND |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| ADNH | FILTRATION RATING IN MICRONS | 10.0 ABSOLUTE AND 2.0 NOMINAL |
| AZTL | BODY OVERALL LENGTH | 1.750 INCHES MINIMUM AND 1.850 INCHES MAXIMUM |
| ADNP | DROP PRESSURE | NOT RATED |
| MEDA | MEDIA FOR WHICH DESIGNED | AIR |
| ADNQ | DIFFERENTIAL PRESSURE | NOT RATED |
| THSD | THREAD SERIES DESIGNATOR | NPT |
| APGF | DESIGN TYPE | REUSABLE |
| CRXW | FILTERING MEDIA DESIGN | CORRUGATED SINGLE FILTERING MEDIA RESPONSE |
| MATT | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM |
| ADAS | BODY INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| AZKQ | TEMP RATING | NOT RATED |
| ABPM | BODY DIAMETER | 1.250 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |