Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 00624 | EATON CORPORATION DBA AEROSPACE DIV |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| ABKV | OUTSIDE DIAMETER | 1.219 INCHES NOMINAL |
| CRXX | MEASURING METHOD AND LENGTH | 84.000 INCHES NOMINAL OVERALL |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-8788,SIZE 12 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADLG | FIRST END FITTING SPEC/STD DATA | MS28760-12S STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 12 SIZE |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, BUNA-N |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.750 INCHES |
| AAJD | THREAD CLASS | 3B 1ST END |
| AGAV | END ITEM IDENTIFICATION | 1055-01-226-6338 |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-H-8788 GOVERNMENT SPECIFICATION |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| AARX | INSIDE DIAMETER | 0.688 INCHES NOMINAL |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |