Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 56878 | SPS TECHNOLOGIES LLC DBA AEROSPACE D |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| ANEE | GRIP LENGTH | 2.250 INCHES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | STSBS000 FSCM 98897 MFR REF ALL TREATMENT RESPONSES OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | H-11 STSBS000 FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AAJD | THREAD CLASS | 3A |
| SFTT | SURFACE TREATMENT | NICKEL OVERALL AND CADMIUM OVERALL AND CHROMATE OVERALL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASU | HEAD HEIGHT | 0.210 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| AAUR | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE |
| AASB | FASTENER LENGTH | 2.634 INCHES MINIMUM AND 2.681 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 132000 POUNDS PER SQUARE INCH |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.501 INCHES MINIMUM FIRST HOLE AND 2.533 INCHES MAXIMUM FIRST HOLE |
| AASK | HEAD STYLE | DOUBLE HEXAGON |
| AATB | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.384 INCHES MINIMUM AND 0.431 INCHES MAXIMUM |