Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
Code | Company |
---|---|
15556 | RICOH AMERICAS CORPORATION |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
AASU | HEAD HEIGHT | 0.049 INCHES MINIMUM AND 0.083 INCHES MAXIMUM |
SFTT | SURFACE TREATMENT | OXIDE OVERALL |
ABQZ | INTERNAL DRIVE STYLE | SLOT |
AASB | FASTENER LENGTH | 0.427 INCHES NOMINAL |
MATT | MATERIAL | STEEL COMP 303 OVERALL |
AASK | HEAD STYLE | FILLISTER |
AAWC | FIRST DIAMETER FROM HEAD | 0.084 INCHES MINIMUM AND 0.088 INCHES MAXIMUM |
AASA | THREAD LENGTH | 0.130 INCHES NOMINAL |
CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924 CL2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNC |
AAJD | THREAD CLASS | 2A |
AASL | HEAD DIAMETER | 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.225 INCHES MINIMUM AND 0.245 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 40 |