Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 87405 | FACET USA INC. DBA FACET INTERNATION |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AZTL | BODY OVERALL LENGTH | 24.000 INCHES NOMINAL |
| APGF | DESIGN TYPE | NONREUSABLE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| ADAS | BODY INSIDE DIAMETER | 1.325 INCHES NOMINAL |
| MATT | MATERIAL | ANY ACCEPTABLE FILTERING MEDIUM |
| ADNP | DROP PRESSURE | 5.0 POUNDS PER SQUARE INCH |
| ADNQ | DIFFERENTIAL PRESSURE | NOT RATED |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY SPCC PROCUREMENT 0000HD03952 |
| ABPM | BODY DIAMETER | 3.375 INCHES NOMINAL |
| AZKQ | TEMP RATING | NOT RATED |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| ADNH | FILTRATION RATING IN MICRONS | 5.0 NOMINAL |
| ADNK | FLOW DIRECTION | INSIDE OUT |
| MATT | MATERIAL | ANY ACCEPTABLE CONTAINER/CARTRIDGE |